1/10th
Technical
Specifications:
The official
measurements in these Technical Specifications are
the metric measurements.
1)
200 mm Nitro
Touring Car which will be 4WD
2)
The engine may have
a total capacity of not more than 2.11cc only. The
engines may have a maximum of four (4) ports in the
liner, including the exhaust port
3)
Maximum 2-speed
gearbox allowed
4)
The Fuel tank
capacity to be 75 cc including all fuel tubings,
filters, etc.
5)
The mufflers and
INS boxes have to bear their homologation numbers
during the entire competition. The mufflers’ and
INS boxes’ measurements (both internally and
externally) have to conform with those on the
homologation sheet issued by IFMAR.
6)
Front Tires maximum
width:
26 mm
7)
Rear Tires maximum
width:
30 mm
8)
Only bodies that
are recognized and approved by IFMAR will be
allowed.
9)
Overall dimensions:
Maximum
width
205mm (with body)
Maximum
height
175mm (with wing, body and Gurney strip with
10mm spacer block)
Minimum
weight
1725 grams (with
empty fuel tank and with timing transponder
installed.)
1/8th
Technical
Specifications:
The official
measurements in these Technical Specifications are
the metric measurements.
1)
All
brands of 1/8 ON-ROAD 4wd car kit will be allowed.
2)
The engine may have
a total capacity of not more than 3.5 cc. No
tolerance allowed.
3)
Maximum 2-speed
gearbox allowed
4)
The Fuel tank
capacity to be 125 cc including all fuel tubings,
filters, etc.
5)
The mufflers and
INS boxes have to bear their homologation numbers
during the entire competition. The mufflers’ and
INS boxes’ measurements (both internally and
externally) have to conform with those on the
homologation sheet issued by IFMAR.
6)
Front Tires maximum
width:
37 mm
7)
Rear Tires Minimum
width:
64 mm
8)
Only bodies that
are recognized and approved by IFMAR will be
allowed.
9)
Overall dimensions:
Maximum
width
277mm (with body)
Maximum
height
180 mm (with wing, body and Gurney strip with
10mm spacer block)
Maximum
weight
2525grams (with
empty fuel tank and timing
transponder installed.)